LNS fedek XH552 | MÁY CẤP PHÔI TỰ ĐỘNG

Mô tả

LNS XH552 là một thiết bị nạp phôi hiệu quả và kinh tế, đảm bảo năng suất tối đa khi nạp các thanh phôi có đường kính từ 5 đến 52 mm.

Sản phẩm mang lại chất lượng dẫn hướng cao, độ ồn thấp và khả năng giảm rung hiệu quả trong suốt quá trình vận hành.

Chi tiết

Locking points along the guiding channels stabilize the machining, increasing productivity.
Power booster overcomes tight pusher collets or out-of-tolerance bar stocks to assist insertion or extraction.
Fast adjustment of bar diameter changeover.
Perfectly fitted design of loading fingers help smoothly bar loading.

Greater bar stock stability and less oscillation inside the lathe
The 2-position hydrostatic front stabilizer is set to the bar diameter and automatically opens to the pusher diameter as it feeds through to provide hydrostatic support from start to finish. It is especially adapted for profiled material (hex) where the guiding element diameter is critical for best performance.

Specifications

Specifications
Specifications	LNS XH552
Model	2.5M	3.0M	12'	4.0M
Bar diameter	Ø5 ~ Ø52 mm
Max bar length	2700 mm	3200 mm	3800 mm	4200 mm
Magazinge capacity	Ø10 x 30 pcs
Overall length	3650 mm	4130 mm	4730 mm	5130 mm
Overall width	893 mm
Loading system	Side load rack
Loading and feeding side	Front/rear - Left/right
Headstock type	Fixed/sliding
Front rest	2-position front rest, pneumatic
Drive	Servo motor
Guiding	Hydrostatic/bearings
Weight	850 kg	900 kg	950 kg	1000 kg
Air supply	5 - 7 kg/cm2
Power supply	220V 3p (Varying power supply is available depending on applications)
Option	Synchronization device
Synchronization (Optional)	Electronic synchronization

Floor plan

*This product is completed operation and product liability insured.
*Design and specification are subject to change without prior notice.

Trở Lại