MINI MASTER| THIẾT BỊ LỌC CHẤT LỎNG

Mô tả

Mini Master có sẵn trong ba mô hình, có khả năng làm sạch 60 đến 200 l / phút dầu gọn gàng và 100 đến 400 l / phút nhũ tương gốc nước, bị ô nhiễm bởi các hạt kim loại và phi kim loại. Khả năng lọc tuyệt vời nhờ môi trường lọc dùng một lần có thể được sửa đổi theo yêu cầu. Đặc trưng bởi một dấu chân rất nhỏ, nó phù hợp với nhiều quy trình công nghiệp như vẽ, mài, cán, giặt, đánh bóng, v.v.

 

Chi tiết

Operation
  • In the initial phase the fabric, stretched inside the filter, is completely clean. The dirty liquid entering must pass through it into the lower tank, where it deposits the pollutants on its surface. The clean liquid then passes into the lower part where it finds the drain opening and falls into the collection tank. During this phase, the system is stationary and the belt does not advance. The pollutant material that settles there forms the actual filter layer, which in many applications can be up to 10 mm thick.
  • In the intermediate phase, the filter fabric becomes dirty and its permeability is reduced because the dirty liquid continues to deposit pollutants on its surface. And so the liquid level starts to rise. The degree of filtration improves due to the thickness of sludge deposited. The system is also stationary in this phase.
  • In the final phase, the liquid level has reached its maximum and the best possible degree of filtration has been achieved. The longer the filter runs in this condition, the better the average filtration will be. The system is also stationary in this phase. When the fabric is completely clogged and the liquid can no longer pass through, the regeneration cycle is started. The gear motor starts the system rotation and the dirty filter fabric is shifted with insertion of the clean one, the permeability is restored, the level drops and the system returns to the intermediate phase, starting the cycle again.